Anguil is built on strong client relationships. We are honored that so many of our clients contact us again when it is time to look at a new air or water pollution control system. To assist customers with shorter lead time or reduced capital cost, Anguil can provide used pollution abatement equipment to satisfy a customer’s need. 

All Anguil used equipment undergoes a thorough inspection, refurbishment, rigorous quality assurance test, and component upgrades. This refurbished equipment listed below provides an affordable pollution control solution backed by a full warranty.

Anguil Refurbished Equipment Advantages:

  • Full factory warranty
  • Discounted prices
  • Completely rebuilt systems with updated controls
  • 75 point inspection and calibration

As with all our products and services, you can expect the highest quality workmanship and engineering with Anguil’s guarantee of excellence.

Available Technologies


ID# 18275

This relatively new concentrator wheel and cassette can be easily coupled with an existing oxidizer for high volume, low concentration applications. The design flow is 20,000 SCFM with an absorption efficiency of 96% and 6-to-1 concentration ratio. Core sample test results are available upon request.

Contact Us
10615 electric catox

ID# 10615 - Refurbished 250 SCFM Electric Catalytic Oxidizer

For Sale or Rent! 90% DRE. Second HLC controller to catalyst inlet added to meet current NFPA regulations. New air proving switch, thermocouples, actuators, and controllers. Replacement of several buttons, switches and lamps. PLC battery.

Contact Us

ID# 16529 - 65,000 SCFM Regenerative Thermal Oxidizer

Brand new Anguil RTO - never run, never commissioned! Originally installed in 2013, unit features carbon steel fuel train, energy recovery, and combustion chambers, IEEE 841 compliant motors, NEMA 12 control panel, SFI, oxygen analyzer, and hot gas bypass.

Contact Us

ID# 16355 - 500 SCFM Direct Fired Thermal Oxidizer

Originally built: 2012 Size: 500 SCFM, up to 60 lbs/r (1 lbs/min) of VOCs, inert gas stream VOC Destruction Efficiency: 99% Availability: Immediately for rental or purchase Features: dual fuel burner with dual blocking valves, Kinedizer low NOx burner, NEMA 4 control panel with awning, and Allen Bradley PLC and HMI.

Contact Us

ID# 11434 - 7,500 SCFM Regenerative Thermal Oxidizer

This Anguil RTO was first installed in 2004 but remains in relatively good condition and is capable of 98% destruction efficiency with 95% thermal recovery. The RTO was originally designed with saddle media for 7,500 SCFM of capacity but it could be upgraded with structured media to handle upwards of 10,000 SCFM. Immediately available for rental or purchase.

Contact Us

ID# 15827 - 2,500 SCFM Regenerative Thermal Oxidizer

The Anguil RTO was originally built in 2011. The Poppet Valves and media support grade have been constructed of 316L stainless steel. The chambers are carbon steel coated with vinyl ester coating. The unit is designed for high thermal efficiency and skid mounted for ease of transport. Immediately available for rental or purchase.

Contact Us

ID# 16512 - 2,000 SCFM Catalytic Oxidizer

This Anguil Catox was built in 2012 and designed for treating off gases from a soil remediation site. The system comes with much of the supplemental equipment needed for remediation applications, including blowers, condensation tank, flammable storage cage, air compressor, storage tank, piping, bridge stands, and more. The entire system has been disassembled and palatalized for shipment so it is immediately available for purchase or rental. Can be sold as a complete system or individual components.

Contact Us
Selective Catalytic Reduction Oxidizer Anguil

ID# 16579 – 15,000 SCFM Catalytic Oxidizer

Designed as a Selective Catalytic Reduction (SCR) system for NOx, this unit could be applied on VOCs or HAPs as well. It includes 304 stainless steel components and stack, variable frequency drive, PLC based controls with burner management system and tube style heat exchanger. Immediately available for purchase.

Contact Us

ID# 80021 - 500 SCFM Catalytic Oxidizer

The Chloro-Cat oxidizer includes monolith catalyst and stainless steel plate heat exchanger. Immediately available for rental or purchase.

Contact Us

ID# 8023 - 1,000 SCFM Catalytic Oxidizer

This refurbished Remidi-Cat is designed for 1,000 SCFM, can process up to 28 lbs/hr of BTEX with a 95%+ Destruction Rate Efficiency and able to operate on propane or natural gas. The oxidizer has 50% effective stainless-steel heat exchanger, chart recorder, Allen Bradley controls with large display and comes with catalyst. The system is immediately available for rental or purchase.

Contact Us

500 SCFM Ceramic Filter/Catalyst

A small oxidizer to test the operation of a specific process exhaust and determine the applicability of catalytic oxidation.

Contact Us

Get In Touch

  • Looking for an Answer Quickly?
  • This field is for validation purposes and should be left unchanged.

Ready to start your project?

Send us your application details.

Request for Quote