No posts to display

Anguil Exhibiting for the First Time at Environmental Trade Fair and Conference (ETFC)

Comments Off on Anguil Exhibiting for the First Time at Environmental Trade Fair and Conference (ETFC)

Anguil is thrilled to announce we will be exhibiting at the Environmental Trade Fair and Conference (ETFC) trade show for the first time May 11-12, 2022 in Austin, TX. Presented by the Texas Commission Environmental Quality (TCEQ), this dynamic environmental conference will put a spotlight on issues important to manufacturers in the region, including air and water permitting, oil and gas, remediation, industrial waste, and much more.

Anguil’s has long been a pollution control equipment leader in the Natural Gas Production and Refining and Petrochemical industries. In fact, Anguil is the largest supplier of oxidizer technologies to the natural gas industry. Our solutions, including Regenerative Thermal Oxidizers (RTOs), Direct Fired Thermal Oxidizers (DFTOs), and Vapor Combustors, are engineered with careful consideration given to the design and material selection to avoid corrosion, equipment failures and non-compliance. Anguil oxidizers are built with quality materials of construction and engineered to withstand the difficult streams and often remote installations. With additional expertise in Industrial Wastewater Treatment solutions as well as local representatives and service personnel, Anguil is positioned to be a single source provider of air and water pollution control needs for the greater Texas region.

Held at the Austin Convention Center, Anguil engineering experts will be onsite at Booth 1245 to discuss how our innovative solutions can meet the needs of your application. More information on the trade show and attendee registration can be found here.

We look forward to seeing you there!

TCEQ ETFC Trade Show Info

Anguil Environmental to Return to SEMICON West in July

Leave a Comment

SEMICON West truly connects the entire extended electronics supply chain. After a successful first year exhibiting in December 2021, Anguil Environmental isSemicon West Logo excited to announce our return to their original summer format SEMICON West event in San Francisco this July 11-14, 2022. It is the premier place to keep up with manufacturing developments of chips, lithography, printed circuit boards and liquid crystal displays. The four day event consists of technical presentations, networking and exhibitions regarding materials, equipment, design, manufacturing, system integration and demand channels.

Anguil understands the industry’s need for up-time, increased production and environmental compliance. We will announce our booth location closer to the event. Interested in setting up a meeting with one of our sales engineers? Call Kevin Summ at 414-365-6400 or email us, and we will set aside some time to speak with you about your unique needs.

Visit www.semiconwest.org for more details. We hope to see you in San Francisco.

Anguil to Exhibit at JEC World 2022

Leave a Comment

Anguil Environmental will be at the JEC World 2022 in Paris from May 3rd-5th, 2022 displaying the latest technologies and techniques being applied in this industry. This will be the first in-person JEC World show since 2019.

JEC World Logo

Specific Air Pollution Control Systems are used for the treatment of emissions from carbon fiber and composite manufacturing that not only ensure compliance but can also reduce the cost of material processing. Attendees of the upcoming JEC will have the opportunity to learn what clean air techniques are working and how they relate to manufacturing costs.

Anguil provides fully integrated systems for air pollution abatement to carbon fiber operations located throughout the world. We are intimately familiar with the capture, control, and compliance hurdles that processing plants face with regard to Volatile Organic Compounds, Hydrogen Cyanide (HCN), Ammonia, Silicone, Nitrogen Oxides (NOX), and odorous emissions.

We have developed the most advanced air pollution control technologies currently used for carbon fiber processes. The proprietary designs offer high destruction efficiency, low greenhouse gas output, and energy recovery options for powering process systems.

  • Process Emissions: Oxidation Ovens & Carbonization Furnaces; Hydrogen Cyanide (HCN), Ammonia (NH3), Volatile Organic Compounds (VOCs), Tar, Silica
  • Abatement Equipment: Regenerative Thermal Oxidizers (RTOs), Multi Staged Direct Fired Thermal Oxidizers (MS-DFTO), Secondary Heat Recovery, Particulate Control
  • Operational & Maintenance Considerations: Designed to Maximize Up Time, Energy Efficiency, and Heat Return to Process. Minimize Maintenance Time & Costs.

Our company is intimately familiar with the capture, control, and compliance hurdles that processing plants face. Visit Anguil in Booth R31f of the United States Pavilion to learn more and speak with experts about your specific needs.

Anguil team members will be on hand throughout the conference to explain how these energy-efficient oxidizer systems are revolutionizing the industry and why they have the highest environmental performance on record.

Registration to attend JEC World 2022 available here.

Anguil Exhibiting at CompositesWorld 2021

Comments Off on Anguil Exhibiting at CompositesWorld 2021

Anguil is thrilled to announce we will be returning to CompositesWorld’s Carbon Fiber 2021 trade show November 9-11, 2021 in Salt Lake City, Utah. CompositesWorld’s Carbon Fiber 2021 provides an objective, comprehensive forum to discuss new developments for carbon fibers in emerging industrial markets. CompositesWorld 2021 logo

Carbon fiber and composites processes can negatively impact the environment and company profit margins if careful consideration is not given to emission control during the production of these materials. Recent developments in air pollution abatement technologies have not only improved destruction capabilities but also allowed producers to reduce operating costs and improve up-time.

Anguil has developed the most advanced air pollution control technologies currently used for Carbon Fiber and Composites processes. Our proprietary designs offer high destruction efficiency, low greenhouse gas output, and energy recovery options for powering process systems. Anguil engineering experts will be onsite to discuss how our innovative solutions can meet the needs of your application. We look forward to seeing you there!

Anguil to Exhibit at Federation of Environmental Technologists (FET) Event in 2021

Comments Off on Anguil to Exhibit at Federation of Environmental Technologists (FET) Event in 2021

To finish off an increasingly busy year of in-person trade shows, Anguil will be once again exhibiting at the Federation of Environmental Technologists (FET) trade show in Pewaukee, WI. Taking place December 7-9, 2021 at the Ingleside Hotel, Anguil experts will be at Environment 2021 to discuss our Air and Water pollution control solutions for industry. Visit us in booth 32P in the Lake Country Ballroom to discuss your application and to learn more about our solutions.

Federation of Environmental Technologists logoFET is an organization dedicated to educating and developing excellence in environmental, health and safety professionals. The goal of the Environment 2021 conference is to provide a high quality, high value hub for environmental training, information gathering, and networking opportunities. Anguil looks forward to exhibiting alongside some of the top environmental companies in Southeastern Wisconsin.

 

Anguil to Exhibit at the IMDPA

Comments Off on Anguil to Exhibit at the IMDPA

Anguil is pleased to be exhibiting in-person at the International Metal Decorating and Packaging Association (IMDPA) annual conference on October 5-7, 2021 in Oak Brook, IL. The two-day event brings together industry professionals and experts to discuss technological innovations and trends across the metal decorating and packaging industries.

The conference will take place at the Hilton – Oak Brook Hills Resort. Anguil experts will be onsite to discuss our innovative solutions for the Metal Decorating industry, including 2 & 3 Piece Can Makers, Coil Coating Operations, and Metal Painting companies. Metal decorators and packagers rely heavily on uptime to maintain profitability. Anguil’s engineering expertise and flexible solutions guarantee compliance and optimized performance so your plant can focus on production.

Registration and more information is available on the IMDPA web site. We look forward to seeing you there!

IMDPA Logo

Anguil Returns to Trade Shows at Coating Trends & Technologies Conference

Comments Off on Anguil Returns to Trade Shows at Coating Trends & Technologies Conference

After a hiatus from in-person speaking events, Anguil will be presenting to attendees of the Coating Trends & Technologies trade show, taking place in Lombard, IL on September 8-9th, 2021. Coating Trends & Technologies is the Midwest’s leading coatings conference, bringing together the field’s leaders to discuss technology innovations across the industry. Anguil is a leading pollution abatement system provider in the Coating & Converting industry, particularly of Regenerative Thermal Oxidizers (RTOs).

On Wednesday, September 8 from 1:00-1:30pm, Anguil’s Senior Application Engineer, Jason Schueler, will be speaking on An Overview of Emission Control Equipment Features, Components and Capabilities as a part of the Coating Process Engineering Track. Coating Trends & Technologies logo

Coating companies currently required to comply with air emission regulations for Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs) are accustomed to the high cost of compliance. Regenerative Thermal Oxidizers (RTOs) are increasingly used in a wide variety of coating applications for the destruction of VOCs, HAPs and even odors. There are features, components and unique capabilities to the RTO that coaters should understand before purchasing a new system or making modifications to an existing one. Jason’s presentation will address these topics as well as some of the process conditions and options that can affect destruction efficiency and operating costs. Jason has spent the past decade in the air pollution control industry specifically focusing on abatement systems for volatile organic compounds and hazardous air pollutants and brings a wealth of knowledge to the topic.

Registration and Attendee Information is available on the Coating Trends & Technologies web site. Jason and Anguil’s sales team will be available for questions after his presentation. We look forward to seeing you there!